RECTANGLE

• Creates a rectangle as a polyline.
• You can draw a rectangle by setting property values.

• Setting option keywords for RECTANGLE

• Chamfer: Cuts the corners of the rectangle diagonally by the specified distance.
• Elevation: Specifies the Z-axis elevation from the XY plane at which to draw.
• Fillet: Rounds the corners of the rectangle by the specified radius value.
• Rotated: Creates the rectangle rotated by a specific angle.
• Square: Used to draw a square.
• Thickness: Creates the rectangle with thickness applied in the Z-axis direction.
• Width: Creates the rectangle with a specific line width.

1. Drawing a Rectangle Demo Video

1) Run the “RECTANGLE” command. 2) Click the mouse to specify the first point, one corner of the rectangle. 3) Click the mouse to specify the second point, the diagonally opposite corner.

2. Rectangle Drawing Option - Chamfer Demo Video

1) Run the “RECTANGLE” command.
2) Enter the Chamfer keyword.
3) Enter the first distance, then enter the second distance.
4) Click the mouse to specify the first point, one corner of the rectangle.
5) Click the mouse to specify the second point, the diagonally opposite corner.

3. Rectangle Drawing Option - Elevation Demo Video

1) Run the “RECTANGLE” command.
2) Enter the Elevation keyword.
3) Enter Default, or enter an elevation value.
4) Click the mouse to specify the first point, one corner of the rectangle.
5) Click the mouse to specify the second point, the diagonally opposite corner.

4. Rectangle Drawing Option - Fillet Demo Video

1) Run the “RECTANGLE” command.
2) Enter the Fillet keyword.
3) Enter the fillet distance.
4) Click the mouse to specify the first point, one corner of the rectangle.
5) Click the mouse to specify the second point, the diagonally opposite corner.

5. Rectangle Drawing Option - Rotated Demo Video

1) Run the “RECTANGLE” command.
2) Enter the Rotated keyword.
3) Click the mouse to specify the first point, one corner of the rectangle.
4) Click the mouse to specify the second point, the diagonally opposite corner.
5) Enter the rotation angle of the rectangle, or click the desired point with the mouse.

6. Rectangle Drawing Option - Square Demo Video

1) Run the “RECTANGLE” command.
2) Enter the Square keyword.
3) Click the mouse to specify the first point, one corner of the rectangle.
4) Click the mouse to specify the second point.

7. Rectangle Drawing Option - Thickness Demo Video

1) Run the “RECTANGLE” command.
2) Enter the Thickness keyword.
3) Enter the thickness value.
4) Click the mouse to specify the first point, one corner of the rectangle.
5) Click the mouse to specify the second point, the diagonally opposite corner.

8. Rectangle Drawing Option - Width Demo Video

1) Run the “RECTANGLE” command.
2) Enter the Width keyword.
3) Enter the width value.
4) Click the mouse to specify the first point, one corner of the rectangle.
5) Click the mouse to specify the second point, the diagonally opposite corner.

9. Drawing a Rectangle by Area Demo Video

1) Run the “RECTANGLE” command.
2) Click the mouse to specify the first corner point.
3) Enter the Area keyword, then enter the value.
4) Enter the reference for calculating the rectangle using the Length or Width keyword, then enter the value.
5) Click the mouse at the point where the rectangle will be created.

10. Drawing a Rectangle by Dimensions Demo Video

1) Run the “RECTANGLE” command.
2) Click the mouse to specify the first corner point.
3) Enter the Dimensions keyword.
4) Enter the length value of the rectangle.
5) Enter the width value of the rectangle.
6) Click the mouse at the point where the rectangle will be created.

11. Drawing a Rectangle by Rotation Angle Demo Video

1) Run the “RECTANGLE” command.
2) Click the mouse to specify the first corner point.
3) Enter the Rotation keyword.
    3-1) Enter the angle.
        3-1-1) You can reconfigure the Area / Dimensions / Rotation options using the currently set angle.
        3-1-2) After setting the value with the desired option, click with the mouse where the rectangle will be created.
    3-2) Enter the Pick points keyword.
        3-2-1) Specify the first point.
        3-2-2) Specify the second point.
        3-2-3) Click with the mouse where the rectangle will be created.