ARC
- Creates an arc.
- You can set the arc’s property values to draw the ARC.
Option 1: Setting Option Keywords for ARC
Section titled “Option 1: Setting Option Keywords for ARC”
| Option | Description |
|---|---|
| Center | Specify the center point, then click the start point and end point with the mouse to create the ARC. |
| Follow | The endpoint of the previous object becomes the start point of the arc. Create the ARC by specifying only the endpoint. |
Option 2: Options After Running ARC and Specifying the Start Point
Section titled “Option 2: Options After Running ARC and Specifying the Start Point”
| Option | Description |
|---|---|
| Angle | By setting the arc’s angle, you can either (1) specify the arc’s center point or (2) specify the endpoint. |
| Center | By setting the arc’s center point, you can either (1) specify the angle or (2) specify the chord length. |
| Direction | By setting the arc’s direction, you can either (1) specify the endpoint based on the start point, or (2) specify the endpoint by setting the angle. |
| End | By setting the arc’s endpoint, you can (1) specify the angle, (2) specify the direction, or (3) specify the radius. |
| Radius | By setting the arc’s radius, you can either (1) specify the included angle and then the direction, or (2) specify the endpoint. |
1. How to Draw an Arc (3-Point Specification: Default Option) Demo Video
Section titled “1. How to Draw an Arc (3-Point Specification: Default Option) Demo Video”1) Run the “ARC” command.
2) Specify the start point, second point, and endpoint to create the arc.
2. How to Draw an Arc Using the Start Point and Angle Demo Video
Section titled “2. How to Draw an Arc Using the Start Point and Angle Demo Video”1) Run the “ARC” command.
2) Specify the start point > click the Angle option > set the angle.
2-1) Click the Center option and specify the center point to create the arc.
2-2) Specify the endpoint to create the arc. (default)
3. How to Draw an Arc Using the Start Point and Center Point Demo Video
Section titled “3. How to Draw an Arc Using the Start Point and Center Point Demo Video”1) Run the “ARC” command.
2) Specify the start point > click the Center option > set the center point.
2-1) Click the Angle option and specify the angle to create the arc.
2-2) Click the Length of Chord option and specify the chord length to create the arc.
2-3) Specify the endpoint to create the arc. (default)
4. How to Draw an Arc Using the Start Point, Direction, and Endpoint Demo Video
Section titled “4. How to Draw an Arc Using the Start Point, Direction, and Endpoint Demo Video”1) Run the “ARC” command.
2) Specify the start point > click the Direction option.
2-1) Click the Follow option and specify the endpoint to create the arc.
2-2) Specify the arc’s initial direction angle and the endpoint to create the arc. (default)
5. How to Draw an Arc Using the Start Point and Endpoint Demo Video
Section titled “5. How to Draw an Arc Using the Start Point and Endpoint Demo Video”1) Run the “ARC” command.
2) Specify the start point > click the End option > set the endpoint.
2-1) Click the Angle option and specify the angle to create the arc.
2-2) Click the Direction option and specify the start direction to create the arc.
2-3) Click the Radius option and specify the radius to create the arc.
2-4) Specify the center point to create the arc. (default)
6. How to Draw an Arc Using the Start Point and Radius Demo Video
Section titled “6. How to Draw an Arc Using the Start Point and Radius Demo Video”1) Run the “ARC” command.
2) Specify the start point > click the Radius option > set the radius.
2-1) Click the Included Angle option > specify the angle > specify the direction to create the arc.
2-2) Specify the endpoint to create the arc. (default)