RECREBAR

• Automatically places point rebars on a rectangular closed rebar (tie).

1) Type “RECREBAR” in the Command Input Window.
2) Following the Command Input Window prompts, select the rectangular object.
3) In the Command Input Window or dialog box, set the following items.

• Distance (D): Point rebar spacing
• Inside_Outside (I): Places the point rebars on the outer or inner side
• Horizontal_Vertical (H): Places the point rebars in the horizontal or vertical direction
• Position (P): Point rebar start position

4) Once the settings are complete, point rebars are automatically inserted along each side of the selected rectangle.